skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Removing and installing radiator > < Fan shroud with radiator fanV7 - Summary of components

Fabia Mk2

Removing and installing fan shroud with radiator fanV7
Removing and installing fan shroud with radiator fan -V7-
Removing
   
–  Screw out screws -arrows- for inlet connection -1-. Remove connecting hose -2- to air filter.
–  Remove the sound dampening system → Body Work; Rep. gr.50.
–  Remove right charge air hose and left charge air hose → Chapter.
–  Disconnect plug for radiator fan -V7- → Chapter; Pos. 17.
  N21-10252
–  Release the fan shroud with the radiator fan -V7- on the right and left catch hooks using a suitable tool.
–  Push the fan shroud with the radiator fan -V7- upwards out of the supports and remove downwards.
Remove the radiator fan from the fan shroud
–  Disconnect the plug connection for the radiator fan -V7- from the holder.
  N19-10333
–  Push the pins back out of the expanding rivets -arrows- → Chapter.
  N19-10332
–  Carefully slacken the fan ring on the reverse side of the shroud using a suitable tool.
–  Remove fan ring.
  N19-10334
–  Unscrew the nuts -arrows- and remove the radiator fan -V7- from the shroud.
Install
Installation is performed in the reverse order, pay attention to the following points:
t  Tightening torque of nuts for radiator fan -V7- → Chapter.
–  Insert the fan shroud with the radiator fan -V7- from below and slide into all 4 supports on the radiator from above.
l  The fan shroud must click audibly into place in the supports on the top right and left.
–  Check that the fan shroud with the radiator fan -V7- catches correctly in the installation position.
  N19-10341

Removing and installing radiator > < Fan shroud with radiator fanV7 - Summary of components