Skoda Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Removing and installing tensioning element for V-ribbed belt >
< Removing and installing V-ribbed belt for vehicles without air conditioning system
Fabia Mk2
Power unit
1.2/55 kW TDI CR Engine
Enginecrankshaft group, pistons / Cylinder block - Belt pulley side / moving_and_installing_v-ribbed_belt/">Removing and installing V-ribbed belt
Removing and installing V-ribbed belt for vehicles with air conditioning system
Removing and installing V-ribbed belt for vehicles with air conditioning system
Removing and installing V-ribbed belt for vehicles with air conditioning system
Special tools and workshop equipment required
t
Locking pin -T10060 A-
Removing
–
Remove the sound dampening system
→ Body Work; Rep. gr.50
.
–
Remove the right wheelhouse liner
→ Body Work; Rep. gr.66
.
–
Remove right charge air pipe
→ Chapter
.
Caution
When installing, risk of damage through reversing the rotation direction of an already used V-ribbed belt.
If the V-ribbed belt is re-installed, mark the direction of rotation with chalk or a felt-tip pen before removing it.
–
Loosen the V-ribbed belt by swivelling the tensioning element in
-the direction of the arrow-
.
–
Align the holes
-arrows-
and lock the tensioning element using the locking pin -T10060 A-.
–
Remove the V-ribbed belt.
Install
Installation is performed in the reverse order, pay attention to the following points:
Note
Before fitting the V-ribbed belt make sure that all assemblies (generator and AC compressor) are securely mounted.
–
Lay the V-ribbed belt onto the V-ribbed belt pulleys.
1 -
Crankshaft belt pulley with vibration damper
2 -
Tensioning element
3 -
AC generator
4 -
AC compressor
–
Hold the tensioning element with the ring spanner and pull out the locking pin -T10060 A-.
–
Release the tensioning element.
–
Check correct positioning of the V-ribbed belt.
–
Start engine and check ribbed V-belt run.
Power unit
1.2/55 kW TDI CR Engine
Enginecrankshaft group, pistons / Cylinder block - Belt pulley side / moving_and_installing_v-ribbed_belt/">Removing and installing V-ribbed belt
Removing and installing V-ribbed belt for vehicles with air conditioning system
Removing and installing tensioning element for V-ribbed belt >
< Removing and installing V-ribbed belt for vehicles without air conditioning system