Bracket for auxiliary units - tightening order and tightening torques |
l
| A dowel sleeve must be located between the bracket for auxiliary units and the cylinder block in the area of the screw hole -6-. |
–
| Insert new fixing screws for the bracket for auxiliary units as follows: |
t
| Screws -1- and -2- M10 x 52 |
t
| Screws -3- and -4- M10 x 30 |
t
| Screws -5- and -6- M10 x 60 |
–
| Gradually tighten the fixing screws for the bracket for auxiliary units in the sequence -1…6-: |
1.
| Screw in all the screws by hand. |
2.
| Tighten all bolts initially to 40 Nm. |
3.
| Turn the screws -3- and -4- a further 45°. |
4.
| Turn the screws -1, 2, 5, 6- a further 90°. |
|
|
|