skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Removing and installing engine oil cooler > < Removing and installing oil pan

Fabia Mk2

Removing and installing oil pump
Removing and installing oil pump
Special tools and workshop equipment required
t  Catch pan, e.g. -VAS 6208-
–  Removing the oil pan → Chapter.
   
–  Pull off the cover -1- from the oil pump.
  N15-10556
–  Unscrew the fixing screws -arrows- of the oil pump.
–  Remove the complete oil pump from the drive chain.
Install
  N15-10560
–  Hook the oil pump with the chain sprocket into the drive chain and tighten the new screws -arrows- to 14 Nm + torque a further 90° (1/4 turn.).
Tightening torque of the suction line: 8 Nm.
–  Installing the oil pan → Chapter.
  N15-10560

Removing and installing engine oil cooler > < Removing and installing oil pan