–
| Disconnect plug -1- and hose -3- from activated charcoal filter system solenoid valve 1 -N80-. |
–
| Remove the lines with the non-return valve -5- and the activated charcoal filter system solenoid valve 1 -N80- from the intake manifold. |
–
| Disconnect coolant hoses -3- with hose clamps -3094 - and detach from charge-air cooler. |
–
| Release the fixing screws of the ignition transformer -N152- and carefully place the ignition transformer onto the cylinder head cover. |
–
| Release fixing screws at charge air cooler -4-. |
–
| Carefully pull the charge air cooler -4- out of the intake manifold. |
Note Pour the residual coolant out of the charge air cooler into a collecting tank. |
Installation is performed in the reverse order, pay attention to the following points: |
|
|
|