skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
High pressure pump > < Air filter - Summary of components

Fabia Mk2

Removing and installing air filter
Removing and installing air filter
(Fabia II, Roomster)
Special tools and workshop equipment required
t  Pliers for spring strap clamps
Removing
–  Remove battery → Electrical System; Rep. gr.27.
   
–  Unscrew the fixing screws -arrows- of the intake air duct and the inlet connection at the exhaust gas turbocharger.
  N10-10357
–  Disconnect vacuum hose -1- from intake hose.
–  Release the fixing screw -2- and pull the air filter housing towards the top from the bearing bolts.
Install
–  Press the air filter housing from the top onto the bearing bolts.
  N10-10356
–  Tighten fixing screw -2- to 8 Nm.
–  Connect vacuum hose -1- to intake hose.
  N10-10356
–  Tighten the fixing screws -arrows- of the intake air duct and the inlet connection at the exhaust gas turbocharger.
–  Install battery → Electrical System; Rep. gr.27.
  N10-10357
ComponentNm
Inlet connection at exhaust gas turbocharger.10
Intake air duct3

   

High pressure pump > < Air filter - Summary of components