skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Aligning exhaust system free of stress > < Middle and rear silencer - Summary of components

Fabia Mk2

Replacing middle or rear silencer
Replacing middle or rear silencer
t  A separation point is provided for repair purposes for replacing the middle or rear silencer.
t  The separation point is marked by indentation on the circumference of the exhaust pipe.
Special tools and workshop equipment required
t  Body saw e.g. V.A.G 1523
t  Protective goggles
  WARNING
Wear safety goggles.
   
–  Separate exhaust pipe at right angles at the separation point -arrow 2-.
–  When installing, position double clamp -4- between the side markings -arrow 1- and -arrow 3-.
  S26-0184
–  Install the double clamp in such a way that the ends of the screws do not protrude beyond the bottom edge of the double clamp -arrow-.
–  Align exhaust system in cold condition free of stress → Chapter.
  A26-0277

Aligning exhaust system free of stress > < Middle and rear silencer - Summary of components