skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

Removing and installing glove box light > < Interior lights and warning light for front passenger airbag deactivation
Removing and installing the interior light in the roof cover
Removing and installing the interior light in the roof cover
The work sequence is the same for the front as for the rear interior light.
Removing
–  Switch off the ignition and all electrical components.
   
–  Carefully lower light scattering cover -arrow- and remove.
  S96-0154
–  Release two screws -1-.
t  Front interior light - 2 Nm
t  Rear interior light - 1 Nm
–  Remove the interior light downwards and disconnect the plug connections.
  Note
It is necessary to not remove the interior light to replace the light bulb.
–  Light bulb -2- without base W5W.
–  Light bulb -3- Soffitte C10W.
Install
–  Installation is carried out in the reverse order.
  S96-0155

Removing and installing glove box light > < Interior lights and warning light for front passenger airbag deactivation