skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
The starter device switch and lock cylinder > < Removing and installing restoring ring with slip ring from steering column switch

Fabia Mk2

Set centre position for restoring ring with slip ring
Set centre position for restoring ring with slip ring
It is only carried out if there is a doubt about the correct setting of the centre position for the restoring ring rotor.
Work procedure
–  Put the front wheels in straight ahead position.
   
–  Slowly turn the ring rotor -1- manually to the right up to the stop.
–  Slowly turn the ring rotor manually to the left up to the stop and count the turns.
–  Slowly turn the ring rotor to the right by half of the counted turns in the centre position (top connector -1- must be in horizontal position).
–  Install steering wheel → Body Work; Rep. gr.69, if necessary lock ring rotor with transport security or adhesive tape -2-.
  S96-0160

The starter device switch and lock cylinder > < Removing and installing restoring ring with slip ring from steering column switch