skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Fixing the B+ wire to the AC generator > < AC generator

Fabia Mk2

Removing and installing the AC generator
Removing and installing the AC generator
Removing
–  Disconnect battery earth strap → Chapter.
–  Remove the V-ribbed belt → engine; Rep. gr.13.
Vehicles with 1.2 TSI and Common Rail engines:
–  Remove the sound dampening system → Body Work; Rep. gr.50.
–  If an air conditioning system is installed, remove the AC compressor (do not open the refrigerant circuit) and secure to the side so that the intake hoses are not excessively strained → Heating, Air Conditioning; Rep. gr.87.
–  1.2 TSI engine - remove additionally the guide pulley → Engine; Rep. gr.13.
All vehicles:
   
–  Remove the screen cap from the fixing nut of the B+ cable, unscrew the nut -1- and disconnect the electrical cable.
–  Unplug connector -2-.
–  Unscrew the securing nut (3.2 Nm) for line holder -3- and lay the line to the side.
  A27-0218
–  Release screws -arrows- (23 Nm).
Vehicles with 1.2 TSI and Common Rail engines:
–  Remove AC generator downwards.
Other vehicles:
–  Remove AC generator upwards.
Install
Installation is performed in the reverse order, pay attention to the following points:
  S27-0094
–  For easier mounting move the threaded bushes -A- approx. 3 mm -arrows-.
  Note
t  Fix the B+ wire correctly to the AC generator → Chapter.
t  Pay attention to the work sequence when re-connecting the battery → Chapter.
  N27-0388

Fixing the B+ wire to the AC generator > < AC generator