skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Removing and installing wiper motor > < Rear window wiper and washer system

Fabia Mk2

Removing and installing the wiper arm with wiper blade and setting its final setting
Removing and installing the wiper arm with wiper blade and setting its final setting
Removing
–  Raise cap.
   
–  Loosen the nut -arrow-.
–  If the wiper arm does not detach by moving laterally from the cone, then remove the spray nozzle → Chapter and use a commercially available extractor in order to remove the wiper arm.
–  Unscrew nut and remove wiper arm.
Install
–  Switch wiper motor on and off and run until it is in park position.
–  Position wiper arm and loosely secure with nut.
  S92-0072
–  Set final position of wiper arm in accordance with the figure. The value -a- is 29 ± 2 mm.
–  Tighten fixing nut (12 Nm).
–  Perform a functional and setting check.
  S92-0085

Removing and installing wiper motor > < Rear window wiper and washer system