Skoda Workshop Service and Repair Manuals > Octavia Mk1 > Body | Body Work | Rear door,sliding door,wing doors,central locking | Rear door

Removing and installing the rear door

Removing

–	Separate plug connection -1- located in the grommet -2- on the pillar B.

For vehicles ► 12.99

–	Remove cap and screw the grub screw -1- out of the upper hinge.

For vehicles 01.00 ►

–	Remove nut -2-.

For all vehicles

–	Unscrew bottom screw -3- out of the door.

–	Lift door up and out of the hinge brackets.

Install

Installation is carried out in the reverse order.

Note

t	After the paintwork, the screws -1- and -2- must be tightened to the specific torque when replacing the doors.

t	The process for the rear door is identical for Octavia Combi.

1 -

32 Nm

2 -

22 Nm

Skoda Workshop Service and Repair Manuals