skoda Workshop Repair Guides

Skoda Octavia Workshop Service and Auto Repair Manuals

ABOUT US
Assembling seat rack and backrest rack > < Installing seat height adjustment handle

Remove backrest rack from seat rack - Octavia Mk1 front seat frames

Remove the backrest rack from the seat rack
Remove the backrest rack from the seat rack
–  Remove front seat → Chapter.
–  Remove seat height adjustment handle → Chapter.
   
–  Remove the adjusting knob -2-.
–  Release screw -1- (1,4 Nm).
–  Unhook the catch pegs of the covers -3- and -4- out of the seat rack and remove covers.
Vehicles with heatable backrest and airbag unit
  S72-0013
–  Remove plug for side airbag unit -1- and el. seat heating -2- (if necessary plug for seat belt buckle signalling) -3- (underneath the seat).
  S72-0025
–  Loosen the terminals of the electric cable -arrow 1- underneath the seat.
–  Remove the plug of the electric cable for the backrest heating from the seat rack -arrow B-.
–  Unclip the plug of the electric cable for the backrest heating -arrow C-.
  S72-0028
–  Loosen the terminals of the electric cable for the seat heating and airbag unit -arrows B- underneath the seat.
  S72-0026
–  Loosen the terminals of the electric cable for the backrest heating and airbag unit -arrows A- on the side of the seat.
–  Loosen the terminal of the electric cable for the backrest heating and airbag unit -arrow B- on the side of the seat.
  Note
The marking on the cable -arrow C- of the electric cable for the side airbag unit must align with the retaining clip -arrow B- on the side of the seat when installing.
For all vehicles
  S72-0027
–  Screw out the screw -1- on both sides of the seat.
–  Remove backrest rack from seat rack.
  S72-0012

Assembling seat rack and backrest rack > < Installing seat height adjustment handle