skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Overview of selectable functions > < Description of the system

Octavia Mk1

Connect the vehicle system tester V.A.G 1552 and select the address word for the seat height adjustment/driver
Connect the vehicle system tester -V.A.G 1552- and select the address word for the seat height adjustment/driver
Special tools and workshop equipment required
t  Vehicle system tester -V.A.G 1552-
t  Diagnostic cable -V.A.G 1551/3, 3A, 3B oder 3C-
Test preconditions for self-diagnosis
l  all fuses must be OK in compliance with the current flow diagram.
l  Battery voltage at least 11.5 volts
   
–  Switch off ignition and connect up vehicle system tester -V.A.G 1552- using the appropriate cable.
–  Switch on ignition.
  S01-0060
–  Readout on display:
–  Enter address word 36.
  
Vehicle system test               HELP
Select address word XX
–  Read-out on display1):
1) Valid for passenger seat
–  Confirm the entry with key Q.
  
Vehicle system test                Q
36 - Seat adjustment - front passenger
–  Readout on display:
  Note
t  One of the following four displays will appear in the event of a communication set-up failure between vehicle system tester -V.A.G 1552- and the control unit.
t  Press HELP key to display the possible fault causes.
  
Vehicle system test               HELP
Tester sends address word 36
The ignition must be on!
  
Vehicle system test               HELP
K cable does not connect to pos. term.
Malfunctions occurred at the start of or during the program (external sources of interference).
  
Vehicle system test                 ->
No signal from the control unit
Inspect the connection of the vehicle system tester, also check the communication cable and the relevant vehicle system → Current flow diagrams, Electrical fault finding and Fitting locations.
–  After removing the possible fault cause re-enter address word 36 and confirm the entry with key Q.
  
Vehicle system test                 ->
Fault in communication set-up
Read-out on display after entering the address word „36“
  
Vehicle system test                    
Tester sends address word 36
–  The vehicle system tester -V.A.G 1552- displays the control unit identification number, e. g.:
–  Press → key.
  
3B1959760A  Seat adjustment  DS  0003 ->

      

      

    
      

      

    
– 
          Readout on display:

      		 
      
    
Vehicle system test               HELP
Select function XX                        

      

      

    


Overview of selectable functions >
< Description of the system