Skoda Workshop Service and Repair Manuals > Octavia Mk1 > Body | Body Work | Trim, noise insulation | Pillar and side trim panels | Removing and installing top trim panel of pillar C (Octavia Combi)

Removing and installing top trim panel of pillar C (Octavia Combi)

1 -

35 Nm

2 -

Cap

3 -	Deflection fitting

4 -

2.5 Nm

5 -

Cover

Removing:

–	Removing support of the luggage compartment cover → Chapter.

–	Remove cap -2-, unscrew screw -1- and take off deflection fitting -3-.

–	Remove screw -4-.

Installation is carried out in the reverse order.

6 -

Gasket

–	After installing the trim panel, check for correct fitting position of the seal and if necessary adjust.

Skoda Workshop Service and Repair Manuals