Component to be tested | Test steps in the test table → Chapter |
Voltage supply of the ABS hydraulic pump -V64- to the ABS control unit -J104- | - Perform test step 1. |
Voltage supply of the valves in the hydraulic unit -N55- to the ABS control unit -J104- | - Perform test step 2. |
Voltage supply (terminal 15) to the ABS control unit -J104- | - Perform test step 3. |
Function of the brake light switch -F- | - Perform test step 4. |
Resistance of the front right speed sensor -G45- | - Perform test step 5. |
Resistance of the front left speed sensor -G47- | - Perform test step 6. |
Resistance of the rear right speed sensor -G44- | - Perform test step 7. |
Resistance of the rear left speed sensor -G46- | - Perform test step 8. |
Voltage signal of the front right speed sensor -G45- | - Perform test step 9. |
Voltage signal of the front left speed sensor -G47- | - Perform test step 10. |
Voltage signal of the rear right speed sensor -G44- | - Perform test step 11. |
Voltage signal of the rear left speed sensor -G46- | - Perform test step 12. |
Jumper | - Perform test step 13. |
Voltage supply for -V.A.G 1552-, plug connection -T16- | - Perform test step 14. |
Resistance of the K cable for -V.A.G 1552-, plug connection -T16- | - Perform test step 15. |
Function of the ABS warning light -K47- | - Perform test step 16. |
Function of the hand brake/brake fluid level warning light -K14/33- | - Perform test step 17. |
Function of the ABS hydraulic pump -V64- | - Perform test step 18. |
Checking the databus cables | - Perform test step 19. |