skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

Coding control unit > < Erasing fault memory
Ending output
Ending output
–  Enter 06 for the function „End output“ and confirm with the key Q.
   
Readout on display:
–  Switch off ignition.
–  Disconnect plug connection from vehicle system tester.
–  Switch on ignition.
The ABS warning light -K47- and the hand brake/brake fluid level warning light -K14/33- must go out after approx. 2 seconds.
 
Vehicle system test               HELP
Select function XX                        

Coding control unit > < Erasing fault memory