Skoda Workshop Service and Repair Manuals > Octavia Mk1 > Drive unit | 1.4 ltr./55 kW Engine - Mechanical Components | Enginecrankshaft group, pistons | Removing and installing cylinder block

Removing and installing pressure plate

Special tools and workshop equipment required

t	Counterholder -MP 1-221-

t	Hexagon screw M8x45 and two hexagon nuts M10

t	Depth gauge

Releasing and tightening the pressure plate

–	Put the counterholder -MP 1-221- into the bore hole on the cylinder block and screw onto the pressure plate.

–	Release screws for pressure plate.

Note

Replace fixing screws for pressure plate.

–	Tighten bolts to 60 Nm + torque a further ¹/₄ turn (90°).

Skoda Workshop Service and Repair Manuals