Skoda Workshop Service and Repair Manuals > Octavia Mk1 > Drive unit | 1.6 ltr./55 kW Engine - Mechanical Components | Engine assy,cylinder block,crankcase | Removing and installing engine | Tightening torques

Assembly bracket > < Removing and installing engine|Install

Tightening torques

Tightening torques

Note

t	Tightening torques apply only for lightly greased, oiled, phosphatized or blackened nuts and screws.

t	Other lubricants such as engine and gearbox oil are allowed but no Molykote.

t	Do not use degreased parts.

t	Tolerance for the tightening torques ± 15%.

Attachment of engine/gearbox

S34-0181

Position		Screw	Nm
1		M12x55	80
2		M12x55 → Note	80
3		M12x120 → Note	80
4		M12x55	80
5		M10x50	45
6		M10x50	45
7		M12x35	20
8		M12x55	80

¹⁾	Screw with threaded pin M8

A: Dowel sleeves for centering

Component		Nm
Screws/nuts	M6	9
	M8	20
	M10	40
	M12	70
deviations:
Engine mounting, gearbox mount, pendulum support		→ Chapter
Pressure plate at crankshaft		60 + 90° → Note
Flywheel to thrust plate		20

²⁾	Always replace screws or nuts

Drive unit
1.6 ltr./55 kW Engine - Mechanical Components
Engine assy,cylinder block,crankcase / Removing and installing engine
Tightening torques

Assembly bracket > < Removing and installing engine|Install