skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Silencer with hangers > < Removing and installing parts of the exhaust system

Octavia Mk1

Exhaust manifold, front exhaust pipe with catalytic converter, lambda probe
Exhaust manifold, front exhaust pipe with catalytic converter, lambda probe
  Note
t  The front exhaust pipe and the catalytic converter are welded together as standard, supplied individually as a spare part.
t  For repairs, separate parts with body saw (e. g. -V.A.G 1523-)
1 - 10 Nm
2 - Hot air collector
3 - Gasket
–  replace
4 - Washer
5 - 25 Nm
–  replace
–  coat with hot bolt paste -G 052 112 A3- before inserting
6 - Exhaust manifold
7 - Lambda probe, 55 Nm
–  use lambda probe wrench for removing and installing
–  coat only thread with hot bolt paste -G 052 112 A3-, hot bolt paste must not get into the slots of the probe body
–  test: → 1.6 ltr./55 kW Engine 1AV fuel injection and ignition system; Rep. Gr.24
8 - Catalytic converter
9 - 20 Nm
–  replace
10 - Gasket ring
–  replace
–  wide side to front exhaust pipe
11 - Front exhaust pipe
12 - 40 Nm
–  replace
–  coat with hot bolt paste -G 052 112 A3- before inserting
13 - Bracket with guide tube
14 - Sheet metal screw, 2 Nm
  S26-0069

Silencer with hangers > < Removing and installing parts of the exhaust system