| –
| Separate exhaust pipe at right angles at the separation point -arrow 2- with body saw (e.g. -V.A.G 1523-). |
| –
| When installing clamping sleeve -4- position on the side markings -arrows 1 and 3. |
| –
| Align exhaust system free of stress → Chapter. |
| –
| Align rear silencer horizontally. |
| –
| Tighten bolted connections of clamping sleeve evenly to 40 Nm. |
| –
| Installation position of clamping sleeve: horizontally in vehicle, bolted connections pointing forward. |
|
|
|
