skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Repairing the accelerator control > < Check fuel flow rate

Octavia Mk1

Removing and installing activated charcoal filter system
Removing and installing activated charcoal filter system
1 - Activated charcoal filter system solenoid valve 1 -N80-
–  Inspecting proper operation and actuation: → 1.6 ltr./74 kW Motor, Simos 2 Injection and ignition system; Rep. Gr. 24; test fuel tank venting; test activated charcoal filter system solenoid valve
2 - Connector
3 - Vent line
–  from gravity valve → Itemto fuel tank
–  to remove, press release button at connecting piece
4 - Throttle valve control unit
5 - Activated charcoal filter
–  with activated charcoal filter system solenoid valve 1 -N80 -
–  Fitting location: in right of engine compartment
–  to remove, first of all remove PAS reservoir and press to the side
6 - Spring nut
  S20-0057

Repairing the accelerator control > < Check fuel flow rate