skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Procedure > < Removing and installing engine - Part 2

Octavia Mk1

Installing the engine
Installing the engine
  Note
t  Always replace the seals and gaskets during assembly work.
t  Replace the self-locking nuts and screws.
t  Clean all threaded holes into which self-locking bolts are inserted, with a thread tap to remove residues of the locking fluid.
t  Coat stud bolts of exhaust manifold with hot bolt paste -G 052 112 A3- before installing.
t  Tightening torques → Chapter.
t  Assembly bracket → Chapter.
t  If the battery is disconnected and reconnected, carry out certain additional operations → Electrical System; Rep. Gr.27.
   

Procedure > < Removing and installing engine - Part 2