skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Removing and installing coolant pump > < Continued for all vehicles

Octavia Mk1

Install
Install
Installation is performed in the reverse order. Pay attention to the following points:
   
–  Tighten thermoswitch -1- to 35 Nm.
–  Fit on brackets -2- and -3- at radiator as shown.
–  Tighten bolts attaching fan shroud and radiator mounts to 10 Nm.
–  On vehicles with air conditioning, tighten bolts attaching condenser and bracket for refrigerant lines to 10 Nm.
–  Replace O-rings in the connection fittings of the coolant hoses.
–  Insert and tighten the coolant drain plug.
–  Filling system with coolant → Chapter.
–  Install headlights → Electrical System; Rep. Gr.94.
–  Electrical connections and proper routing → Current flow diagrams and Fitting locations.
  S19-0053

Removing and installing coolant pump > < Continued for all vehicles