skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Removing and installing exhaust manifold|Install > < Removing and installing exhaust manifold

Octavia Mk1

Removing
Removing
–  Remove top part of intake manifold → 1.6-ltr./75 kW Engine, Fuel Injection and Ignition System; Rep. Gr.24.
–  Remove front exhaust pipe → Chapter.
For engines with engine code AVU
   
–  Unscrew union nut on connecting pipe for the secondary air system -1-.
Continued for all engines
–  Unscrew union nut on connecting pipe for the exhaust gas recycling -2-.
–  Unscrew bolts or nuts -3- for shield palte and remove shield plate.
For engines with engine code AVU
–  Unbolt support -4- on the exhaust manifold and engine block.
Continued for all engines
–  Unbolt protective cover and unplug 6-pin lambda probe plug.
–  Slacken retaining clip for lambda probe cable and remove lambda probe.
  S26-0097
–  Unscrew nuts -1- on both brackets -3-, take off washers -2- (if fitted).
–  Unscrew remaining nuts at exhaust manifold -4-, take off washers (if fitted).
–  Take off exhaust manifold and gasket for exhaust manifold -5-.
  S26-0098

Removing and installing exhaust manifold|Install > < Removing and installing exhaust manifold