skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
If the measured value does not correspond to the specified value: > < Test conditions

Octavia Mk1

Test sequence
Test sequence
–  Switch off ignition.
–  Unlock plug connection and remove from engine control unit.
–  Connect the -V.A.G 1598/31 - to the engine control unit. Do not connect cable to the engine control unit.
–  Check mean terminating resistance in the engine control unit and measure the resistance between the test box-bushes.
   
Bush to text box -1598/31-Bush to text box -1598/31-
5860

Specified value: 60...72 Ω.
   

If the measured value does not correspond to the specified value: > < Test conditions