skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

Display group 066, Cruise Control System: > < Display group 060, engine speed control (adapting throttle valve control unit)
Display group 062, Electronic throttle system
   
Display group 062, Electronic throttle system
l  Ignition on, engine stopped
 
Reading measured value block 62⇐ Readout on display  
xx %xx %xx %xx %   
1234⇐ Display fieldsSpecification
Analysis
    Sender 2 for accelerator pedal position - G185-0...100 %---
   Sender 1 for accelerator pedal position -G79-12...97 %---
  Throttle valve angle (potentiometer 2 -G188 -)97...3 %---
 Throttle valve angle (potentiometer 1 -G187-)3...93 %---

  Note
t  The engine control unit converts the voltage values of the accelerator pedal position sender in percentage (in relation to 5 Volts). A 5 V voltage supply corresponds to 100 %.
t  If the accelerator pedal is fully pressed down, the specified value range changes.
t  The value displayed in display field 3 must always be approximately double the value in display field 4.
   

Display group 066, Cruise Control System: > < Display group 060, engine speed control (adapting throttle valve control unit)