skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Overview of fitting locations ? 07.97 > < Rules of cleanliness

Octavia Mk1

Technical data
   
Technical data
Engine identification characters AGN ? 07.97AGN 08.97 ?
Idling speed
speed not adjustable, is controlled by the idle stabilizer		Gearbox  
(air conditioning off)
(air conditioning on)		800 ±50 rpm
860 ±50 rpm		800 rpm + 80/-40 rpm
800 ± 100 rpm
automatic gearbox   
(air conditioning off)
(air conditioning on)		800 ±50 rpm
860 ±50 rpm		800 rpm + 80/-40 rpm
860 ± 100 rpm
Speed limiter by disconnecting the injectors6800 rpm
Motronic control unit1) 
Spare part number → Electronic Catalogue of Original Parts
Fuel pressure at idling speedVacuum hose fitted onapprox. 0,25 MPa (2,5 bar)
Vacuum hose disconnectedapprox. 0,30 MPa (3,0 bar)
Holding pressure after 10 minutesat least 0.15 MPa (1.5 bar) overpressure
Injection valvesInjection jet2-hole nozzle
Injection rate (30 s)85 to 105 ml
Resistance (ambient temperature) 2)13 to 18 Ω

1) After replacing the engine control unit, an adaptation to the throttle valve control unit → Chapter and to the electronic immobiliser → Chapter must be performed.
2) If the engine is warm the resistance of the injection valves increases by approx. 4 to 6 Ω.
   

Overview of fitting locations ? 07.97 > < Rules of cleanliness