skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

Accelerator control > < Check fuel flow rate
Removing and installing activated charcoal filter system
   
Removing and installing activated charcoal filter system
1 - Activated charcoal filter system solenoid valve 1 - N80-
q   Check operation and control: → 1.8 ltr./92 kW Engine, Fuel Injection and Ignition System Motronic; Rep. Gr.24
2 - Connector
3 - Vent line
q   from gravity valve to fuel tank → Item
q   to remove, press release button at connecting piece
4 - Throttle valve control unit
5 - Activated charcoal filter
q   with activated charcoal filter system solenoid valve 1 -N80 -
q   Fitting location: in right of engine compartment
q   for removal, first of all remove PAS reservoir and press to the side
6 - Spring nut

   

Accelerator control > < Check fuel flow rate