Skoda Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Safety precautions when working on the fuel supply system >
< Removing and installing the fuel tank with its component parts
Octavia Mk1
Drive unit
1.9 l/81 kW TDI Engine, Mechanics
Fuel supply, gas operation / Removing and installing parts of the fuel supply system
Removing and installing fuel cooler
Removing and installing fuel cooler
Removing and installing fuel cooler
Special tools and workshop equipment required
t
Torque wrench
Removing
Observe rules for cleanliness
→ Chapter
Note
The fuel cooler is located at the return-flow line to the fuel tank. It is attached to the underfloor of the vehicle body.
–
Take off cover
-A-
.
–
Separate fuel line at fuel cooler.
–
Unscrew fixing nuts
-arrows-
.
Install
Installation is carried out in the reverse order. Pay attention to the following:
t
Tighten fixing nuts for the fuel cooler to 20 Nm.
Drive unit
1.9 l/81 kW TDI Engine, Mechanics
Fuel supply, gas operation / Removing and installing parts of the fuel supply system
Removing and installing fuel cooler
Safety precautions when working on the fuel supply system >
< Removing and installing the fuel tank with its component parts