Skoda Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
1.9 ltr./50 kW (SDI) Engine, Mechanics >
< Test condition
Octavia Mk1
Drive unit
1.9 l/96 kW (TDI) Engine, Fuel Injection and Glow Plug System
Ignition system, glow plug system / Testing preheating system / ecking_glow_plugs/">Checking glow plugs
Test sequence
Test sequence
Test sequence
–
Switch off ignition.
–
Remove engine cover.
To do so remove the front and rear engine cover upwards with a sudden motion.
–
Remove glow plug connectors from the glow plugs.
–
Connect the wire of the diode test lamp to battery positive (+).
–
Apply test prod of the diode test lamp to each glow plug in turn.
If the diode lights up: Glow plug is O.K.
If the diode does not light up:
–
Replace glow plug.
–
If necessary remove and install glow plugs with flexible-head wrench (e.g. -3220-).
Tightening torque: 15 Nm
Drive unit
1.9 l/96 kW (TDI) Engine, Fuel Injection and Glow Plug System
Ignition system, glow plug system / Testing preheating system / ecking_glow_plugs/">Checking glow plugs
Test sequence
1.9 ltr./50 kW (SDI) Engine, Mechanics >
< Test condition