skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Work step 10: 2nd test of exhaust gas recirculation > < Work step 8: Switch on ignition

Octavia Mk1

Work step 9: 2nd test of fuel system and other systems
Work step 9: 2nd test of fuel system and other systems
–  Start engine.
–  Select function 08“Read measured value block” and display group 001.
–  Increase engine speed for 5 seconds to 2500 rpm and then run engine at idling speed.
   
Readout on display:
  
Reading measured value block  1   ->
2500 rpm    4.6 mg/stroke  2.0°CA  94.2 °C

Work step 10: 2nd test of exhaust gas recirculation > < Work step 8: Switch on ignition