Octavia Mk1
| Overview of fitting locations ? 07.97 |
| Components A to E are not shown on the overview figure |
| A - | Diesel direct injection system relay -J322- |
| t | Electrical centre → Fig. |
| B - | Glow plug relay -J52 - |
| t | Electrical centre → Fig. |
| C - | Accelerator pedal position sender -G79- |
| t | in footwell on the accelerator pedal → Chapter |
| D - | Brake light switch -F- and brake pedal switch -F47- |
| t | together in one housing |
| t | in footwell on the brake pedal → Fig. |
| E - | Clutch pedal switch -F36- |
| t | in footwell on the clutch pedal → Fig. |
| 1 - | Mechanical exhaust gas recirculation valve |
| 2 - | Injection nozzle with needle lift sender - G80- |
| 3 - | Engine control unit -J248- |
| t | with altitude sender -F96- |
| 4 - | Exhaust gas recirculation valve -N18- |
| 5 - | Solenoid valve for charge pressure control -N75- |
| 6 - | Air mass meter -G70- |
| 7 - | High heat output relay -J360- |
| t | only for vehicles fitted with optional equipment: |
| 8 - | Low heat output relay - J359- |
| t | only for vehicles fitted with optional equipment: |
| 9 - | Coolant temperature sender -G62 - |
| 10 - | Engine speed sender -G28- |
| 11 - | Plug connection |
| t | 2-pin |
| t | for needle lift sender -G80- |
| 12 - | Plug connection |
| t | 3-pin |
| t | for engine speed sender -G28- |
| 13 - | Plug connection |
| t | 10-pin |
| t | for fuel temperature sender -G81- |
| t | for metering adjuster -N146- |
| t | for modulating piston movement sender -G149- |
| t | for commencement of injection valve -N108- |
| t | for fuel shut-off valve -N109- |
| 14 - | Commencement of injection valve - N108- |
| 15 - | Fuel shut-off valve -N109- |
| 16 - | Metering mechanism of the injection pump |
| t | with fuel temperature sender |
| t | with metering adjuster -N146- |
| t | with modulating piston movement sender -G149- |
| 17 - | Intake manifold pressure sender -G71- and intake manifold temperature sender -G72- |
|
|
