| –
| Press → key. The secondary air pump relay -J299- is controlled by the motor for the secondary air pump. It continues running at intervals until the → key is pressed. |
| If the secondary air pump motor -V101 - does not run at intervals: |
| –
| Select function 06 “End output” and switch off ignition. |
Note | The ignition must be switched off after final control diagnosis is ended. If the ignition is not switched off before the engine is next started, the engine will not start as the injectors and the ignition transformer are not operated. |
|
|
Actuator diagnosis -> | Secondary air pump relay J299 |
|
