Removing and installing parts of the secondary air system |
For engines with engine code AQY and AZH |
Note 1 - | Combination valve 08.2000 ? |
–
| Valve closed in standstill |
–
| the valve is opened by air pressure from the secondary air pump |
2 - | Combination valve ? 07.2000 |
3 - | Vacuum hose ? 07.2000 |
5 - | Secondary air injection valve -N112-*/** ? 07.2000 |
–
| in bracket above the brake servo unit |
6 - | To connection on pipe for brake servo unit |
7 - | Secondary air pump relay -J299-*/** |
–
| in relay protective housing in engine compartment next to brake servo unit |
–
| press together at front to unlock |
12 - | Secondary air pump motor -V101 -** |
–
| attached to intake manifold |
17 - | Bottom part of intake manifold |
18 - | To connection on exhaust manifold |
–
| with mount for combination valve |
For engine with engine code AZJ |
–
| Valve closed in standstill |
–
| the valve is opened by air pressure from the secondary air pump |
–
| press together at front to unlock |
6 - | Secondary air pump motor -V101 -** |
–
| attached to intake manifold |
12 - | Bottom part of intake manifold |
14 - | To connection on exhaust manifold |
–
| with mount for combination valve |
19 - | Secondary air pump relay -J299-*/** |
–
| in relay protective housing in engine compartment next to brake servo unit |
|
|
|