skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Removing and installing control motor of fresh air flap and re-circulating air flap V154 > < Removing and installing fresh air blower V2

Octavia Mk1

Removing and installing series resistor for fresh air blowerN24
Removing and installing series resistor for fresh air blower -N24 -
–  Remove screw clip for foam cover.
   
–  Swing foam cover -C- to the side.
–  Remove the connector -A- from the series resistor.
–  Release screws -B- and remove resistor carrier.
Remove series resistor from the resistor carrier
  S80-0092
–  Bore out or break off attachments -A-.
–  Press back -C- catches.
–  Remove series resistor -B-.
–  Installation is carried out in the reverse order.
  Note
When installing, fix series resistor with sheet metal screw -D- of 3.2x10 mm.
  A80-0071

Removing and installing control motor of fresh air flap and re-circulating air flap V154 > < Removing and installing fresh air blower V2