Octavia Mk1
| Summary of components - shift housing / shift lever |
Note| Grease all bearing and contact surfaces with grease -G 000 450 02-. |
| 1 - | Gearshift knob |
| q | removing and installing together with the collar Pos. 2 |
| q | removing → Fig. and → Fig. |
| 2 - | Collar |
| q | removing and installing together with the gearshift knob Pos. 1 |
| q | removing → Fig. and → Fig. |
| q | Separate collar from gearshift knob → Fig. |
| q | before installing, assemble with gearshift knob → Fig. |
| 3 - | Sound absorption |
| q | only for vehicles fitted with a 1.9 litre/50 kW engine |
| 4 - | Clamping sleeve |
| q | connects collar with gearshift knob |
| q | removing and installing → Fig. |
| 5 - | Open warm-type clamp |
| q | for securing the gearshift knob to the gearshift lever |
| q | open → Fig. |
| q | always replace → Electronic Catalogue of Original Parts |
| q | attach with hose binding claw -V.A.G 1275- onto the gearshift knob |
| 6 - | Shift lever |
| q | removing and installing from shift housing → Chapter |
| 7 - | Spacer bush |
| 8 - | Collar screw, 25 Nm |
| 9 - | Shift housing |
| q | removing and installing → Chapter |
| 10 - | Gear shift rod |
| q | removing and installing → Chapter |
| q | after installing set shift mechanism → Chapter |
| 11 - | 20 Nm |
| 12 - | 25 Nm |
| 13 - | Pressure spring |
| 14 - | Stop |
| q | after installing set shift mechanism → Chapter |
| 15 - | 25 Nm |
| q | Coat thread with locking agent -D 000 600 A2- |
| 16 - | Ball socket |
| q | removing → Chapter |
| 17 - | Bushing |
| 18 - | Shock absorber |
| 19 - | 15 Nm |
|
|
|
|
