skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Removing and installing the clutch pedal > < Summary of components - Foot controls

Octavia Mk1

Removing and installing the over-centre helper spring
Removing and installing the over-centre helper spring
Special tools and workshop equipment required
t  Assembly clamps -3317-
Removing
–  Remove the bottom left storage area on the driver's side → Rep. Gr.70.
   
–  Using the clutch pedal stretch the over-centre helper spring, while doing so push down the assembly clamp -3317- from above.
  Note
The bore hole -arrow- points towards the clutch pedal.
–  Position the clutch pedal in home position and remove the over-centre helper spring together with assembly clamp -3317-
Install
–  Put the clutch pedal in home position.
  S30-0030
–  First position the over-centre helper spring in the over-centre helper spring bearing -B-, then press the clutch pedal down until the centering pin of the clutch pedal -A- touches the over-centre helper spring.
–  Using the clutch pedal stretch the over-centre helper spring, while doing so remove the assembly clamp -3317-.
  S30-0031

Removing and installing the clutch pedal > < Summary of components - Foot controls