skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Removing and installing the over-centre helper spring > < Repairing the clutch control

Octavia Mk1

Summary of components - Foot controls
Summary of components - Foot controls
Special tools and workshop equipment required
t  Polycarbamide grease -G 052 142 A2-
  Note
t  Summary of components - Hydraulics → Chapter.
t  Disconnect earth strap of the battery.
t  Before disconnecting the battery determine the code of radio sets fitted with anti-theft coding.
t  After connecting the battery, perform the following:
t  - on vehicles with radio encoding, carry out the coding,
t  - re-set clock,
t  - initialise power windows on vehicles fitted with power windows → Octavia.
t  Grease all bearing and contact surfaces with Polycarbamide Grease -G 052 142 A2-.
t  Prior to working on the foot controls remove the storage area on the driver's side → Rep. Gr.70.
   
1 - Support/Front wall
q   for master cylinder and bracket
2 - Gasket
q   always replace → Electronic Catalogue of Original Parts
3 - Bearing bracket
4 - Screw
5 - Gas/brake foot controls
6 - Self-locking nut, 25 Nm
q   always replace → Electronic Catalogue of Original Parts
7 - Connecting plate
8 - Nut, 25 Nm
q   always replace → Electronic Catalogue of Original Parts
9 - Spacer bush
10 - Bushing
11 - Clutch pedal
q   removing and installing → Chapter
12 - Support
q   only replace if the master cylinder has been removed → Electronic Catalogue of Original Parts
q   removing → Fig.
q   installing → Fig.
13 - Nut, 25 Nm
q   always replace → Electronic Catalogue of Original Parts
14 - Master cylinder
q   remove and install on left-hand drive vehicles → Chapter
15 - Tubing
16 - Over-centre helper spring
q   removing and installing → Chapter
17 - Bearing/over-helper centre spring
q   insert in bearing bracket
q   always replace → Electronic Catalogue of Original Parts
18 - Pedal stop
19 - Screw, 25 Nm
q   always replace → Electronic Catalogue of Original Parts

   

Removing and installing the over-centre helper spring > < Repairing the clutch control