Octavia Mk1
| Drive train settings and code lettering |
| A - | Head bevel gear |
| B - | Shank bevel gear |
| C - | Actual gap between head bevel gear axis and reverse side of the shank bevel gear at point of smoothest running for this particular drive train It is 70.00 mm |
| 1 - | Drive train pairing number |
| q | in the example: 5050 |
| 2 - | Shank bevel gear deviation (D = +2) |
| q | Adjustment dimension for series |
| 3 - | Interlocking clearance (Sd = 0.12) |
| q | Inspection dimension |
| 4 - | Gap “R”: Actual gap between head bevel gear axis and front side of the shank bevel gear at point of smoothest running for this particular drive train |
| q | in the example: R = 43.14 means R = 43.14 mm |
| Ro - | Length of master setting used on testing machine “Ro” = 42.70 mm |
| r - | This deviation “r” must first be determined → Chapter |
