skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Disassembling and assembling the gearshift forks as of gearbox manufacturing date 19 05 3 > < Disassembling and assembling the gearshift forks

Octavia Mk1

Disassembling and assembling the gearshift forks up to gearbox manufacturing date 18 05 3
Disassembling and assembling the gearshift forks up to gearbox manufacturing date 18 05 3
Special tools and workshop equipment required
t  Pressure plate -MP3-407 (VW 402)-
t  Thrust piece -MP3-453 (VW 431)-
t  Distance sleeve -MP3-458 (VW 472)-
t  Pressure spindle -MP6-405 (VW 411)-
t  Interior extractor 18.5...23.5 mm e.g. -Kukko 21/3-
t  Countersupport e.g. -Kukko 22/1-
   
1 - Gear shift rod with shift fork for 1st and 2nd gear
2 - Gear shift rod with shift fork for 3rd and 4th gear
3 - Gear shift rod with shift fork for 5th and 6th gear
4 - Gearshift fork reverse gear
5 - Ball sleeve
q   removing → Fig.
q   installing → Fig.

   
Remove ball sleeve for gearshift fork reverse gear
A - Interior extractor 18.5...23.5 mm, e.g. -Kukko 21/3-
B - Countersupport, e.g. -Kukko 22/1-
  S34-0564
Install ball sleeve for gearshift fork reverse gear
  S34-0565

Disassembling and assembling the gearshift forks as of gearbox manufacturing date 19 05 3 > < Disassembling and assembling the gearshift forks