| Mounting sequence for gearbox as of gearbox manufacturing date 19 05 3 |
| Removing and installing the gearbox housing, shift mechanism, drive shaft, output shafts, differential gear, angle gearbox (only four-wheel drive) and gear shift rods |
| Special tools and workshop equipment required |
| t
| Press-on sleeve -MP3-412 (VW 455) - |
| t
| Multi-purpose tool -MP3-419 (VW 771)- |
| t
| Adapter -MP3-419/40 (VW 771/40)- |
| t
| Supporting bridge -MP3-425 (30 - 211 A)- |
| t
| Gearbox mount -MP3-501- or gearbox mount -T30109 (VW 353)- with retaining plate -T30108- |
| t
| Assembly stand -MP9-101- |
| t
| Hot air blower, e.g. -V.A.G 1416- |
| t
| Separating device 5...60 mm, e.g. -Kukko 17/0- |
| t
| Sealant -AMV 188 200 03- |
| t
| Locking agent -D 000 600 A2- |
| t
| Grease for the plug serration of the clutch disc -G 000 100- |
| t
| Socket insert 6 mm, at least 190 mm long, (commercially available) |
|
|
|
