Octavia Mk1
Exhaust gas recirculation system - Summary of components for engines with identification characters AVU, BFQ |
Note
t | The function or the control of the exhaust gas recirculation system is monitored by the self-diagnosis of the engine control unit -J361-. |
t | The exhaust gas recirculation valve with cone-shaped valve plunger makes it possible to achieve different opening cross-sections at different valve strokes. |
t | Any desired valve position is possible as a result of the pulsed operation. |
t | Testing exhaust gas recirculation valve -N18- → Vehicle diagnostic tester. |
1 - | Gasket |
q | replace |
2 - | 10 Nm |
3 - | Connecting pipe |
4 - | 25 Nm |
5 - | from combination valve |
q | for engines with identification characters AVU |
q | Secondary air system → Chapter |
6 - | Exhaust manifold |
7 - | 4 Nm |
8 - | Bushing |
q | for lambda probe upstream of catalytic converter |
9 - | Lambda probe -G39-, 50 Nm |
10 - | 6-pin plug |
q | black |
q | for lambda probe -G39- and heating for lambda probe -Z19- |
11 - | 60 Nm |
12 - | Throttle valve control unit -J338- |
13 - | 25 Nm |
14 - | Gasket |
q | replace |
15 - | Exhaust gas recirculation valve -N18- with exhaust gas recirculation potentiometer -G212- |
q | Testing exhaust gas recirculation valve -N18- → Vehicle diagnostic tester |
16 - | 6-pin plug |
17 - | from air filter |
18 - | Bleeder hose |