–
| Pull out rubber-metal bearing as shown. |
1 - | Pressure spindle -MP6-405 (VW 411)- |
2 - | Pipe section -T10219/1- |
3 - | Pressure plate - MP3-407 (VW 402)- |
Inserting the rubber-metal bearing |
In order not to damage the rubber-metal bearing when inserting it, it must positioned at an angle. During the press-in procedure the rubber-metal bearing straightens. |
–
| Apply assembly sliding oil -G 294 421 A1- to the outside of the rubber-metal bearing. |
|
|
|