skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Removing and installing window crank > < Removing and installing trim panel on front passenger's door

Octavia Mk2

Removing and installing the rear door trim panel
Removing and installing the rear door trim panel
Removing:
   
–  Insert a screwdriver (max. 5 mm wide) in the opening on the underside of the door handle and lever off the cover -1-.
  Note
To avoid damaging the door trim panel, place a plastic spatula -2- between the screwdriver and the trim panel.
  S70-0342
–  Release screws -2- and -3- (4 Nm).
  S70-0334
–  Unclip cover for treble speaker -1- and disconnect plug connection -2-.
–  Remove screw -arrow- (1 Nm).
–  Remove window crank (if present) → Chapter.
  S70-0325
–  Unclip door trim panel -1- from the door and take it out in -the direction of arrow-.
–  Unhook the control cable of the door handle and separate the plug connections.
Installing:
–  Installation is carried out in the reverse order.
  S70-0319

Removing and installing window crank > < Removing and installing trim panel on front passenger's door