Skoda Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Removing and installing the rear door trim panel >
< Removing and installing trim panel on driver's door
Octavia Mk2
Body
Body Work
Trim, noise insulation
Door trim panels
Removing and installing trim panel on front passenger's door
Removing and installing trim panel on front passenger's door
Removing and installing trim panel on front passenger's door
Removing:
–
Switch off the ignition and all electrical components.
–
Insert a screwdriver (max. 5 mm wide) in the opening on the underside of the door handle and lever off the cover
-1-
.
Note
To avoid damaging the door trim panel, place a plastic spatula
-2-
between the screwdriver and the trim panel.
–
Release screws
-1-
and
-3-
(4 Nm).
Note
The door handle
-2-
is attached with screws through the door trim panel and can only be removed from inside together with the trim panel.
–
Unclip cover for treble speaker
-1-
and disconnect plug connection
-2-
.
–
Remove screw
-arrow-
(1 Nm).
–
Release screws
-arrows-
(1 Nm).
–
Remove window crank (if present)
→ Chapter
.
–
Unclip door trim panel
-1-
from the door and take it out in the
-direction of arrow A-
.
–
Unhook the control cable of the door handle and separate the plug connections.
Installing:
–
Installation is carried out in the reverse order.
Body
Body Work
Trim, noise insulation
Door trim panels
Removing and installing trim panel on front passenger's door
Removing and installing the rear door trim panel >
< Removing and installing trim panel on driver's door