skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Removing and installing top trim panel of pillar C (Octavia Combi II - vehicles without head airbag) > < Removing and installing top trim panel of pillar C (vehicles without head airbag)

Octavia Mk2

Removing and installing top trim panel of pillar C (vehicles with head airbag)
Removing and installing top trim panel of pillar C (vehicles with head airbag)
  WARNING
Safety regulations should be observed when handling the airbag units → Chapter.
Disconnect battery earth strap → Electrical System → Rep. gr.27.
  Note
Violent disassembly of the upper trim panel for pillar C poses the risk of triggering the head airbag.
Removing:
–  Removing supports of the luggage compartment cover → Chapter.
–  Removing the finishing strip → Chapter.
   
–  Lever out cap (Pos. 3).
–  Release screws -4- (3 Nm).
–  Unclip top trim panel of pillar C (Pos. 1) from pillar C (Pos. 2).
Installing:
–  Installation is carried out in the reverse order; pay attention to the following points:
t  Pay attention to the sequence when connecting the battery → Electrical System → Rep. gr.27.
  S70-0341

Removing and installing top trim panel of pillar C (Octavia Combi II - vehicles without head airbag) > < Removing and installing top trim panel of pillar C (vehicles without head airbag)