skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Removing and installing bracket > < Separating the brake pedal from the brake servo unit and clipping onto brake servo unit

Octavia Mk2

Removing and installing brake pedal
Removing and installing brake pedal
Removing
–  Separating the brake pedal from the brake servo unit → Chapter.
–  Slacken the 4 screws from the steering column and with the assistance of a second mechanic push the steering column out of the bearing and hold → Chassis; Rep. gr.48.
   
–  Unscrew the nut -1-, while doing so counterhold the screw of the brake pedal -4-.
–  Remove the screw of the brake pedal -4- towards the left.
–  Take the brake pedal -3- out of the bearing bracket -2-.
–  Push the steering column back into the bearing and tighten the 4 fixing screws by hand.
–  Remove brake pedal.
Install
–  Slacken the 4 screws from the steering column and with the assistance of a second mechanic push the steering column out of the bearing and hold.
  S46-0201
–  Insert the brake pedal -3- into the bearing bracket -2-.
–  Insert the screw of the brake pedal -4- from the left.
–  Push the steering column into the bearing and tighten the 4 fixing screws by hand → Chassis; Rep. gr.48.
–  Screw on the nut -1- and tighten together with the screw -4- → Item.
–  Clip the brake pedal onto the brake servo unit → Chapter.
  S46-0201
Tightening torques: 
Brake pedal to bracket
t  Use new nut!
25 Nm

   

Removing and installing bracket > < Separating the brake pedal from the brake servo unit and clipping onto brake servo unit