Octavia Mk2
Repairing the brake caliper FS-III |
t | Brake inspection → Chapter. |
t | Install the complete repair set when undertaklng repairs. |
t | Only use white spirits to clean the brakes. |
t | Thinly coat brake cylinder, piston and gasket ring with lithium grease -G 052 150 A2-. |
1 - | Dust cap |
q | place on the vent valve |
2 - | Vent valve, 10 Nm |
q | thinly coat thread with lithium grease -G 052 150 A2- before screwing in |
3 - | Bushing |
q | insert into the brake caliper |
4 - | Guide bolt, 30 Nm |
5 - | Caps |
q | insert in bushing |
6 - | Brake caliper |
7 - | Sealing ring |
q | removing and installing → Chapter |
8 - | Piston |
q | removing and installing → Chapter |
q | first thinly coat piston with lithium grease -G 052 150 A2- |
9 - | Protective cap |
q | removing and installing → Chapter |
q | do not damage when inserting the piston |