skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Master brake cylinder > < Checking the non-return valve

Octavia Mk2

Removing and installing the pressure sensor for the brake servo unit G294
Removing and installing the pressure sensor for the brake servo unit -G294-
Removing:
–  Disconnect the plug from the pressure sensor for the brake servo unit -G294-.
–  Pull the vacuum line with the pressure sensor for the brake servo unit -G294- out of the brake servo unit.
   
–  Unlatch clamps -1- e.g. with pliers.
–  Carefully lever off the pressure sensor for the brake servo unit -G294--2- from the vacuum line.
Installing:
Installation is carried out in the reverse order.
  S47-0140

Master brake cylinder > < Checking the non-return valve